ASTM D7249/D7249M-18 pdf

05-19-2020 comment

ASTM D7249/D7249M-18,Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure.
ASTM D7249/D7249M-18 has been SUPERSEDED by ASTM D7249/D7249M-20.
ASTM D7249/D7249M-18 covers determination of facesheet properties of flat sandwich constructions subjected to flexure in such a manner that the applied moments produce curvature of the sandwich facesheet planes and result in compressive and tensile forces in the facesheets.
ASTM D7249/D7249M-18 consists of subjecting a long beam of sandwich construction to a bending moment normal to the plane of the sandwich, using a 4-point loading fixture. Deflection and strain versus force measurements are recorded.
The only acceptable failure modes for sandwich facesheet strength are those which are internal to one of the facesheets. Failure of the sandwich core or the core-to-facesheet bond preceding failure of one of the facesheets is not an acceptable failure mode. Careful post-test inspection of the specimen is required as facesheet failure occurring in proximity to the loading points can be caused by local throughthickness compression or shear failure of the core that precedes failure of the facesheet.

                                           Related Information                                             Download
PS:Thank you for your support!
ASTM D2939-98 pdf download ASTM Standards

ASTM D2939-98 pdf download

ASTM D2939-98 pdf free download.Standard Test Methods for Emulsified Bitumens Used as Protective Coatings. ASTM D2939-98 covers procedures for sampling and testing emulsified bitumens used in relatively thick films as protective coatings for metals and built-up roofs....
Read More
ASTM C94/C94M-15a pdf download ASTM Standards

ASTM C94/C94M-15a pdf download

ASTM C94/C94M-15a pdf free download.Standard Specification for Ready-Mixed Concrete. ASTM C94/C94M-15a covers ready-mixed concrete as defined in 3.2.2 (Note 1). Requirements for quality of ready-mixed concrete shall be either as stated in this specification or as ordered...
Read More
ASTM D56-16 pdf download ASTM Standards

ASTM D56-16 pdf download

ASTM D56-16 pdf free download. Standard Test Method for Flash Point by Tag Closed Cup Tester. To ensure an acceptable precision, this dynamic flash point test method employs a prescribed rate of’ temperature rise for the material...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information