ASTM F1015-03(2017),Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces.
ASTM F1015-03(2017) is applicable to both laboratory and field measurement of synthetic turf surfaces used for sports.
4. Summary of Test Method
4. 1 Friable foam blocks are attached to a weighted platform which is pulled over the playing surface in a prescribed manner. The weight of foam abraded away determines the relative abrasiveness of the surface
5. Significance and Use
5. 1 Data obtained from the procedure of this test method are indicative of the relative abrasiveness of fabric or carpet type synthetic playing surfaces.
9. Number of Specimens
9.1 At least five specimens shall be tested and may be required. In the case of field evaluation, five tests shall be performed, and may be required. in the area of interest or over the entire playing surface depending on the intended data use.
9.2 The sampling procedures of Recommended Practices E105 and E122 should be followed and may be required.
10. Sample Conditioning
10. 1 Field samples shall be under the intended use condition, although loose debris shall be removed prior to testing.