BS/EN 686-2019 pdf download

08-01-2021 comment

BS/EN 686-2019 pdf download.Resilient floor coverings Specification for plain and decorative linoleum on a foam backing.
This BS/EN 686 specifies the characteristics of plain and decorated linoleum on a foam backing as a compound floor covering, supplied in roll form.
To encourage the consumer to make an informed choice, this document includes a classilication system based on the intensity oluse. which shows where resilient floor coverings provide satisfactory service.
The term linoleum’ is frequently incorrectly applied to a range of floor covenngs, often to those based on polyvinyl chloride or rubber. Such materials are not included in this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 10874, Resilient, textile and laminate floor coverings — classification EN ISO 23997, Resthent floor coverings — Dctermmation of mass per unit area EN ISO 24340, Resilient floor coverings — Determination of thickness of layers
EN ISO 24341, Resilient and textile floor coverings — Determination of length, width and straightness of sheet
EN ISO 24343-1, Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation
EN ISO 24344, Resilient jloor coverings — Determination of flexibility and deflection
EN ISO 24345, Resilient floor coverings — Deter,ninution of peel resistance
EN ISO 24346, Resilient floor coverings — Determination of overall thickness
EN ISO 26985, Resilient floor coverings — Identification of linoleum and determination of cement content and ash residue
EN ISO 105-B02, Textiles — Tests for colourfastness — Part B02: Colourfastness to artificial light: Xenon arc fading lamp test
ISO 4918, Resilient, textile and laminate floor coverings — Castor chair test
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— JEC Ek’ctropedia: available at http://www.electrodia.orgJ
— ISO Online browsing platform: available at http:)/.iso.org/obp
3.1
linoleu ni
product produced by caienaering one or more mayers om a homogeneous mixture 01 linoleum Cement, cork and/or wood flour, pigments and inorganic fillers containing a fibrous reinforcement and/or a fibrous backing; the product Is then converted into its final form by an oxidative curing process
Note 1 to entry: The only chemical crosslinking bondings In linoleum are those which are formed during the oxidation process.
3.2
linoleum enient
binder in linoleum, consisting of a mixture of linseed oil and/or other vegetable drying oils, rosin and drying oil catalysts, which is converted to a semi-elastic mass by an oxidative curing process
3.3
linoleum on a foam backing
product formed by laminating linoleum on to a foam layer
4 Identification
Linoleum shall be identitied by its ability to be disintegrated in 0,5 mol/l potassium hydroxide/methanol solution and by the determination of cement content and ash residue.
The minimum amount of linoleum cement shall be 30% when tested in accordance with EN ISO 26985.
The maximum amount of inorganic tiller (ash residue) shall be 50 % when tested in accordance with
EN ISO 26985.
5 Requirements
7 Marking, labelling and packaging
Plain and decorative linoleum on a foam backing and/or their packaging shall bear the following marking:
a) number and date of this European Standard,te. EN 686:2019;
b) manufacturer’s or supplier’s identification;
c) product name;
d) colour/pattern. and batch and roll number;
e) classes/symbols appropriate for the product;
1) type of foam backing; (for example PU, PE, PVC);
g) length, width and nominal thickness.BS/EN 686-2019 pdf download.

                                           Related Information                                             Download
PS:Thank you for your support!
BS EN 12607-3-2000 pdf download BS Standards

BS EN 12607-3-2000 pdf download

BS EN 12607-3-2000 pdf download.Methods of test for petroleum and its products — BS 2000-460.3: Bitumen and bituminous binders — Determination of the resistance to hardening under the influence of heat and air — Part 3: RFT...
Read More
EN 12329-2000 pdf download BS Standards

EN 12329-2000 pdf download

BS EN 12329-2000 pdf download.Corrosion protection of metals — Electrodeposited coatings of zinc with supplementary treatment on iron or steel. This BS EN 12329 specifies requirements for electrodeposited coatings of zinc on iron or steel witt supplementary...
Read More
BS EN 1430-2000 pdf download BS Standards

BS EN 1430-2000 pdf download

BS EN 1430-2000 pdf download.Methods of test for petroleum and its products — BS 2000-292:Bitumen and bituminous binders — Determination of particle polarity of bitumen emulsions (Identical with IP 292-2000). This BS EN 1430 specifies a method...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information