Free Standards Download

ANSI SCTE-41-2011 pdf download POD Copy Protection System 1. INTRODUCTION 1.1 SCOPE In digital Cable systems, high value movies and video programs (“content”) are protected by a conditional access scrambling system. A properly authorized CableCARD™ Point of...

ANSI SCTE-56-2011 pdf download DIGITAL MULTIPROGRAM DISTRIBUTION BY SATELLITE 3.1.2 Matched filter This universal element of a satellite IRD performs the complementary pulse shaping filtering type according to the roll-off. The use of a Finite Impulse Response...

ANSI SCTE-101-2011 pdf download “Mainline” Splice Connector Return Loss 1.0 SCOPE AND DEFINITIONS 1.1 This document describes a procedure to measure the Return Loss characteristics of a single Mainline Splice Connector interfaced between (2) mainline cables. It...

ANSI SCTE-110-2011 pdf download Hybrid Fiber Coax Outside Plant Status Monitoring: Alternative Power Supply to Transponder Interface Bus (PSTIB) For HMS Transponders 2.2 Section 3.1.4 of ANSI/SCTE 25-3 2010 Section 3.1.4 of ANSI/SCTE 25-3 20101 shall be...

ANSI SCTE-112-2011 pdf download HMS / DOCSIS ® Transponder for Outside Plant Power Supply 1.0 SCOPE This document contains the requirements for a “HMS / DOCSIS ® Transponder for Outside Plant Power Supply.” The HMS / DOCSIS...

ANSI SCTE-115-2011 pdf download Test Method for Reverse Path (Upstream) Intermodulation Using Two Carriers 1.0 SCOPE 1.1 This test procedure defines a method of measurement of intermodulation distortion in the reverse “upstream” path of Cable Telecommunications equipment....

ANSI SCTE-116-2011 pdf download Specification for 5/8-24 Port, Female Adapters 1.0 SCOPE The purpose of this specification is to serve as a recommended guideline for the physical dimensions of female 5/8 - 24 port that is used...

ANSI SCTE-119-2011 pdf download Measurement Procedure for Noise Power Ratio 1.0 SCOPE This procedure defines a method of measurement for Noise Power Ratio (NPR) of active Cable Telecommunications equipment. It is intended for measurement of 75-ohm devices...

ANSI SCTE-120-2011 pdf download Test Method for Balance Ratio of 75-300 Ohm Matching Transformer 1.0 SCOPE AND DEFINITIONS 1.1 This test procedure provides a method for measuring the balance ratio of broadband radio frequency (RF) devices whose...

ANSI SCTE-123-2011 pdf download Specification for “F” Connector, Male, Feed-Through 1.0 SCOPE The purpose of this document is to specify requirements for male “F” feed-through connectors that are used in the 75 ohm RF broadband communications industry....