ISO 1984-0:1984 pdf download.Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle — Part 0: General introduction.
This part of ISO 1984 defines the machining processes that can be carried out on milling machines with table of fixed height, with horizontal or vertical spindle, and describes the different types of machines.
Milling machines with table of variable height are covered by ISO 1701
This part of ISO 1984 also gives a terminology for the main elements of the machine.
NOTE – In addition to terms used in the three official ISO languages English, French and Russian)， this International Standard gives the equivalent terms in German, Italian, Dutch, Spanish and Swedish these have been included at the requcst of Technical Committee ISO/TC 39 and are published under the responsibility of the Member Bodies for Germany, F R. (DIN)， Italy (UNl)， the Netherlands (NNI) Spain (IRANOR)and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.
3 Definitions of the machining processes that can be carried out
3.1 Milling operations
Milling is a machining operation which consists of removing material by means of a rotary tool called a “milling cutter” of which there are several different types
The usual milling operations can be divided into three categories:
— slab milling operations (see figure 1);
— face milling operations (see figure 2);
— end milling operations (see figure 3).ISO 1984-0:1984 pdf download.