JIS F7498:2001

01-04-2023 comment

JIS F7498:2001 成人女子用衣料のサイズ
1. 適用範囲 この規格は,成人女子用の既製衣料品(和服及び和装品を除く。)のサイズ及び表示方法について規定する。 備考 この規格の対応国際規格を,次に示す。 なお,対応の程度を表す記号はISO/IEC Guide 21に基づきIDT(一致している), MOD(修正している), NEQ(同等でない)とする。 ISO 3637 : 1977 Size designation of clothes−Womenʼs and girlsʼ outerwear garments (MOD) ISO 4416 : 1981 Size designation of clothes−Womenʼs and girlsʼ underwear, nightwear, foundation garments and shirts (MOD)
2. 引用規格 次に掲げる規格は,この規格に引用されることによって,この規格の規定の一部を構成する。これらの引用規格のうちで,発行年を付記してあるものは,記載の年の版だけがこの規格の規定を構成するものであって,その後の改正版・追補には適用しない。発効年を付記していない引用規格は,その最新版(追補含む。)を適用する。
JIS L 0111 衣料のための身体用語
JIS L 0112 衣料の部分・寸法用語 JIS L 0215 繊維製品用語(衣料) ISO 3635 : 1981 Size designation of clothes−Definitions and body measurement procedure
3. 定義 この規格で用いる主な用語の定義は,JIS L 0111,JIS L 0112及びJIS L 0215によるほか,次による。
a) 成人女子 身長の成長が止まった女子。
b) 既製衣料品 付表1に示す衣服。
c) 既製衣料品のサイズ 既製衣料品の全体としての大きさ。基本身体寸法及び特定衣料寸法で表す。
d) 基本身体寸法 既製衣料品のサイズの基礎となる身体部位の寸法。既製衣料品のサイズとしてセンチメートル単位で表す。

                                           Related Information                                             Download
PS:Thank you for your support!
AGMA 2000FTM10-2000 pdf download JIS Standards

AGMA 2000FTM10-2000 pdf download

Carburized spur gears were tested to determine bending fatigue life under variable loads. Fatigue life in random tests is shorter than in block programmed tests. However, chronological order of loads in block programmed tests has insignificant influence....
Read More
AGMA 2000FTM2-2000 pdf download JIS Standards

AGMA 2000FTM2-2000 pdf download

The International Gearing Standard IS0 6336, in part 5, addresses the metallurgical requirements to achieve the rated service performance. For high quality carburise case hardened gears the heat treater is required to achieve, in conjunction with other...
Read More
JIS Z8739:2001 JIS Standards

JIS Z8739:2001

JIS Z8739:2001 音響−音響パワーレベル算出に 使用される基準音源の性能及び 校正に対する要求事項 Acoustics−Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels 1. 適用範囲 この規格は,基準音源についての次の音響性能の要求事項を規定する。 − 音響パワー出力の時間定常性及び繰返し性 − スペクトル特性 − 指向性指数 音響パワー出力の安定性及び指向性が必要とされる音源の指向性指数は,通常は基準音源の適合性試験に付随して算出される。指向性測定のために(例外については5.5参照),適合性試験は半無響環境に限って実行できる。定期的検証測定の場合に,通常,周波数バンドの音響パワーレベルだけを測定する。この場合に測定は半無響又は残響条件で実施してよい。また,この規格は,オクターブバンド及び1/3オクターブバンドでかつ周波数重み付けAで,空気の特性インピーダンス(爀  一一洀㌰死地慎における音響パワーレベルで表すための基準音源として使用するための音源の校正手順を規定する。適合性試験及び検証のために様々な手順を規定する。 備考 基準音源は,例えばISO 9295のように,1/2オクターブバンドでの測定のために使っても差し支えない。 しかし,そのような状況ではこの規格で規定される安定性と再現性の限界は適用されない。...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information