SAE AS 39029-83-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-28840 CONNECTORS)
REQUIREMENTS:
Dimensions, design characteristics, and configuration: See figure 1 and table I.
Tools: See table II.
Localized finish option: Applicable contacts shall be furnished as specified in the localized finish requirements of MIL-C-39029. The E dimension of the Y area shall be .290 inch minimum. Nickel underplate required.
Vibration: Method 2005 of MIL-STD-1 344, test condition III. Following the test, the contacts shall be tested for endurance in accordance with MIL-STD-1 67/1 .
High impact shock: High impact shock test shall be conducted in accordance with MIL-C-28840, using a MIL-C-28840 qualified connector that has been approved for listing on the applicable qualified products list.
Mating contact: MIL-C-39029/84.
QPL evaluating activity: Naval Weapons Support Center, Crane, Indiana 47522.
Porosity test localized finish: If localized finish is used, porosity shall be tested in accordance with method 1 01 7 of MIL-STD-1 344. Immersion in nitric acid is not applicable.