SAE AS 39029-92-2000 pdf download Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-R-6106 and MIL-S-12883/40 and /41 Relay Sockets)
Present Requirement:
Tablelll,BIN Code“-531”，Crimp Positioner“M22520/2-06”Change Requirement:
1. Change Table Il,BIN Code “-531″, Crimp Positioner “M22520/2-06” to Crimp Positioner“K1561 or 640100 or equivalent 1/”.
2.Add the following footnote below Table Ill:“1/ K1561 is a Daniel Tool Company part number and 640100 is an Astro Tool Company partnumber
Rationale for Change: The M22529/2-06 crimps the wire barrel at the wrong location causingnconsistent crimp tensile strength and receiving inspection problems which affect aircraft
production schedules.
REQUIREMENTS:
Qualification:
Electrical contact shall be tested using a relay and relay socket in accordance with MIL-S-1 2883/40 and MIL-S-1 2883/41 (latest revision).
Design and construction: See figure 1 and table I.
ELECTRICAL:
Mating electrical contact: Relay pin, see MIL-S-1 2883/40 and MIL-S-1 2883/41 for part or identifying number (PIN).
Current rating (maximum): Operating current shall be determined by derating for intended applications (see table II).