Free Standards Download

SAE AS 14184-2000 pdf download NONMETALLIC SHAFT-COUPLING DETAILS, ENGINE DRIVEN ACCESSORIES SPLINES. MALE SHAFT SPLINES SHALL HAVE A MINIMUM SURFACE HARDNESS OF 34 ROCKWELL C TO A MINIMUMCASE DEPTH OF 0035 INCHES 2. MATERIAL SELECTION THE PLASTIC...

SAE AS 14241-2000 pdf download CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC 1.MATERIAL: a)BAND THE BAND SHALL BE FABRICATED EROM ALUMINUM ALLOY.OR CORROSION RESISTANT STEEL INACCORDANCE WITH THE PROCUREMENT DOCUMENT. b) CUSHION THE CUSHION SHALL BE FABRICATED FROM...

SAE AS 17320-2000 pdf download MOUNTING DEVICES FOR AIRCRAFT ELECTRIC EQUIPMENT, QUICK ATTACH-DETACH, CIRCULAR, 5-, 8-, AND 10-INCH NOTES: 1. SPECIFICATION: DATA FOR MIL-E-81099 ARE AS FOLLOWS (INITIAL NUMBERS REFER TO PARAGRAPHS OF THE SPECIFICATION) 1.2 CLASSIFICATION:...

SAE AS 21919-2000 pdf download CLAMP, LOOP TYPE, CUSHIONED SUPPORT NOTES: 1. MATERIAL: BAND: a. CODE LETTER C - TYPE 321 CORROSION RESISTANT STEEL PER AMS 5510 b. CODE LETTER D - 2024-0 ALUMINUM ALLOY PER AMS-QQ-A-250/5...

SAE AS 21939-2000 pdf download BOLT, CLUSTER FITTING, SINGLE PORT, THROUGH, FLARELESS REQUIREMENTS: MATERIAL: ALUMINUM ALLOY - BARS.SEE PROCUREMENT SPECIFICATION. FINISH:SEE PROCUREMENT SPECIFICATION.2. SURFACE FINISH IN ACCORDANCE WITH ANSI B46.1UNLESS OTHERWISE SPECIFIED，ALL OUTSIDE MACHINED SURFACES SHALL BE125...

SAE AS 21940-2000 pdf download BOLT, CLUSTER FITTING, DOUBLE PORT, FLARELESS REQUIREMENTS: 1. MATERIAL: ALUMINUM ALLOY - BARS. SEE PROCUREMENT SPECIFICATION. 2. FINISH: SEE PROCUREMENT SPECIFICATION. SURFACE FINISH IN ACCORDANCE WITH ANSI B46.1. ALL OUTSIDE MACHINED SURFACES...

SAE AS 21941-2000 pdf download BOLT, CLUSTER FITTING, DOUBLE PORT, THROUGH, FLARELESS REQUIREMENTS: MATERIAL: ALUMINUM ALLOY - BARS.SEE PROCUREMENT SPECIFICATION. 4FINISH:SEE PROCUREMENT SPECIFICATION. SURFACE FINISH IN ACCORDANCE WITH ANSIB46.1.UNLESS OTHERWISE NOTED ALL OUTSIDE MACHINED SURFACES SHALL BE...

SAE AS 21944-2000 pdf download BOLT, CLUSTER FITTING, TWO WAY, 1 80°, FLARELESS NOTES: MATERIAL: ALUMINUM ALLOY BAR OR FORGING SEE PROCUREMENT SPECIFICATION. 2.FINISH: SEE PROCUREMENT SPECIFICATION. SURFACE FINISH IN ACCORDANCE WITH ANSI B46.1.ALL MACHINED SURFACES FINISHED...

SAE AS 22759-3-2000 pdf download WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-TFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT TEMPERATURE RATING: 260°C (500°F) max conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level SPARK TEST OF PRIMARY INSULATION: Not required...

SAE AS 22759-6-2000 pdf download WIRE, ELECTRICAL, FLUOROCARBON-INSULATED, ABRASION RESISTANT EXTRUDED PTFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT TEMPERATURE RATING: 260°C (500°F) max conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level SPARK TEST OF PRIMARY INSULATION:...