Free Standards Download

API Spec 1581:2002 pdf download.SPECIFICATIONS AND QUALIFICATION PROCEDURES FOR AVIATION JET FUEL FILTER/SEPARATORS 2.1.1 Filter/separator A filter/separator is a vessel containing filter/coalescer and separator elements that continuously removes dirt and water from aviation jet fuel to levels...

API SPEC 16R:1997 pdf download.Specification for Marine Drilling Riser Couplings 1 SCOPE 1.1 Purpose This specification pertains to the design, rating, manufac- turing and testing of marine drilling riser couplings. Cou- pling capacity ratings are established to...

API Spec 15LR:2001(R2018) pdf download.Specification For Low Pressure Fiberglass Line Pipe and Fittings 5.7.3 Cyclic or Static Pressure Test a. Using the cyclic test data or static test data and regression analysis as developed for the pipe,...

API Spec 15LR:2001(R2013) pdf download.Specification for Low Pressure Fiberglass Line Pipe 1 Scope 1.1 COVERAGE This speciÞcation covers Þlament wound (FW) and centrif- ugally cast (CC) Þberglass line pipe and Þttings for pipe in diameters up to...

API SPEC 15HR:2001 pdf download.Specification for High Pressure Fiberglass Line Pipe If only one regression test as defined above is conducted, the Specification 15HR Standard Pressure Rating shall be based on that test and shall be valid...

API Spec 7:2001 pdf download.Specification for Rotary Drill Stem Elements 3 Definitions For the purposes of this speciÞcation, the following deÞni- tions apply: 3.1 bevel diameter: The outer diameter of the contact face of the rotary shouldered...

API spec 4F:2001 pdf download.Specification for Drilling and Well Servicing Structures 1 Scope This specification covers the design, manufacture, and use of steel derricks, portable masts, crown block assemblies, and substructures suitable for drilling and servicing of...

API SPEC 2B:2001 pdf download.Specification for the Fabrication of Structural Steel Pipe 1 Scope 1.1 This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and cir- cumferential butt-welded seams, typically in...

API Spec 2B:2001(R2012) pdf download.Specification for the Fabrication of Structural Steel Pipe 1 Scope 1.1 This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and cir- cumferential butt-welded seams, typically in...