Free Standards Download

AGMA 9000-C90 pdf download

The information contained within this Standard does not necessarily agree with some existing specifi-cations for other rotating components and equipment. This Standard is based upon the design criteria,related to the balancing of couplings, that have evolved over...

02-29

AGMA 6114-B15-2015 pdf download

This standard provides a method to determine the power rating of gear sets with spur and helical conventional pinions and spur self-aligning pinions for cylindrical grinding mills, kilns, coolers, and dryers. The formulas are applicable to steel,...

02-29

AGMA 6034-B92-1992 pdf download

The formulas presented in this standard contain terms whose individual values can vary significantly depending on application, system effects, accuracy, and manufacturing method. Proper evaluation of these terms is essential for realistic rating. The knowledge and judgment...

02-29

AGMA 6009-A00-2000 pdf download

Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily...

02-28

AGMA 6000-B96-1996 pdf download

Performance of driven equipment is dependent upon the individual characteristics of the prime mover, gear unit, driven machine and support structure, as well as their combined effects as a system. The proper assessment of performance characteristics is...

02-28

AGMA 2111-A98 pdf download

This standard describes and defines variations that may occur in unassembled wormgearing. It displays mea- suring methods and practices, giving suitable warnings if a preferred probe cannot be used. The applicability of single or double flank composite...

02-28

AGMA 2015-2-B15-2015 pdf download

02-28

AGMA 2015-1-A01 pdf download

Data was added for Gear Rack and Fine--Pitch Worms and Wormgears. The former AGMA 390.02 for Coarse--Pitch and Fine--Pitch Spur, Helical and Herringbone Gearing was enhanced to offer a single, compatible classification system. The tolerance identifier “Q”...

02-28

AGMA 2000FTM10-2000 pdf download

Carburized spur gears were tested to determine bending fatigue life under variable loads. Fatigue life in random tests is shorter than in block programmed tests. However, chronological order of loads in block programmed tests has insignificant influence....

02-28

AGMA 2000FTM3-2000 pdf download

This paper will compare and contrast two newly revised documents. IS0 6336-5 and AGUA 923, with two that are familiar to today’s gear producers -AGMA 2001 and 2003. These new documents were prepared on a consensus basis...

02-28