Free Standards Download

ANSI Z245.2-2008 pdf download Stationary Compactors – Safety Requirements for Installation, Maintenance and Operation 3.17 continuously operating stationary compactor: Stationary compactor where the main motor remains in continuous operation, or can start automatically while unattended. 3.18 contract...

ANSI Z245.30-2008 pdf download Operations for Wastes and Recyclable Materials --- Waste Containers – Safety Requirements 3.6 container: A receptacle (also referred to as a bin) that receives and holds refuse for lifting, unloading, or transportation by...

ANSI Z245.60-2008 pdf download Operations for Wastes and Recyclable Materials --- Waste Containers – Compatibility Dimensions 1 Scope 1.1 This standard applies to newly manufactured containers that are used in conjunction with the collection, processing and disposal...

ANSI SCTE-138-2009 pdf download STREAM CONDITIONING FOR SWITCHING OF ADDRESSABLE CONTENT IN DIGITAL TELEVISION RECEIVERS 6.2 The MPEG-2 Transport Stream The transmission of addressable advertising within a digital cable television system is in compliance with MPEG-2 and...

ANSI SCTE68-2008 pdf download Drop Passives: Matching Transformers 75Ωto 300Ω SCOPE1.0 The purpose of this document is to specify recommended mechanical and electricalstandards for broadband radio frequency (RF) devices whose primary purpose is to provideimpedance and connector...

ANSI SCTE152-2008 pdf download Test Procedure for Contact Resistance Measurement of Mainline Plug Interface .0 SCOPE 1.1 The purpose of this test procedure is to measure the resistance between the contact of the connector and cable interfaces....

ANSI AHRI-580-2009 pdf download Non-Condensable Gas Purge Equipment For Use with Low Pressure Centrifugal Liquid Chillers D1.1 Purges that contain adsorptive/absorptive media (referred to later as media) have special rating and listing requirements. If the purge contains...

ANSI CEMA-300-2009 pdf download SCREW CONVEYOR DIMENSIONAL STANDARDS ●DIMENSION "F” IS EQUAL TO ONE HALF (1/2) THE HANGER BEARING SPACE PLUS THE THICKNESS OF THE TROUGH END PLATE FROM CEMA STANDARD No. 300-013 OR 300-014. WHERE MORE...

ANSI E1.5-2009 pdf download Entertainment Technology— Theatrical Fog Made With Aqueous Solutions Of Di- And Trihydric Alcohols 1 Scope This standard describes the composition of theatrical fogs or artificial mists that are not likely to be harmful...

ANSI CTA-2035-2010 pdf download Emergency Alert Metadata for the Home Network 2.5 Compliance Notation As used in this document, “shall” and “must” denote a mandatory provisions of the standard. “Should” denotes a provision that is recommended but...