EN 63044-1-2017 pdf download

08-13-2021 comment

EN 63044-1-2017 pdf download.Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -Part 1: General requirements (IEC 63044-1:2017).
This part of IEC 63044 applies to all Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) and specifies the general requirements for these systems and products.
This document is applicable (but not limited) to
— operator stations and other human—system interface devices,
— devices for management functions,
— control devices, automation stations and application specific controllers.
— field devices and their interfaces, and
— cabling and interconnection of devices
used within a dedicated HBES/BACS network.
This document provides an overview of the IEC 63044 series.
To enable integration of a wide spectrum of applications, the IEC 63044 series covers
• electrical safety,
• functional safety,
• environmental conditions,
• EMC requirements, and
• installation and cabling rules and topologies.
IEC 63044 is a series of product family standards
2 Normative references
There are no normative references in this document.
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Note 110 entry: An HBESIBACS network can carry digital data as well as analogue signals.
3.1.3
HBESIBACS
combination of HBES/BACS products (including their separate connected/detachable devices) linked together via one or more HBES/BACS networks
Note 1 to entry: Other names used such as “home control network”“home control systems”“home and building electronic systems”. “building systems. “building automation system”, etc. descnbe types of HBESIBACS system
3.1.4
interface
shared boundary between two implementations of functions belonging to one or more functional groupings
3.1.5
interoperability
ability of devices to exchange commands via the higher layers resulting In meaningful actions
Note Ito entry: This includes aspects of the application domain, which by definition Is beyond the OSI domain.
3.1.6
service
benefit provided by an interapplication binding, or a local controller or remotely by a service provider to a consumer, and using entities and functions of applications that are available to it
3.1.7
cluster
group of applications using the same type of HBES for approximately the same type of information to be exchanged driven by the same industrial and market sector
3.2 Abbreviated terms
BACS Building Automation and Control Systems
HBES Home and Building Electronic Systems
HVAC Heating. Ventilation and Air Conditioning
4 General requirements
A product claiming compliance with IEC 63044 shall comply with all applicable parts listed under Clause 5 in the framework of Its intended use as declared by the manufacturer. Compliance with single parts of IEC 63044 shall be notified individually in the product documentation (e.g. compliant with IEC 63044-3, IEC 63044-5-1 and IEC 63044-5-2, etc.).
This part is under consideration.
lEG 63044-2 provides the environmental conditions for all devices connected to HBES/BACS and defines the general requirements for devices operating in weather protected and non- weather protected locations, sea environments, portable use and also for storage and transport.
5.2 Part 3: Electrical safety requirements
IEC 63044-3 provides the electrical safety requirements related to the HBES/BACS network In addition to the product safety standards for HBES/BACS devices.
It also applies to devices used within a HBES/BACS network for which no specific
HBES/BACS product safety standard exists.
In addition, IEC 63044-3 defines safety requirements for the interface of equipment intended
to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example 01 other networks is a dedicated ICT network covered by IEC 62949.
5.3 Part 4: Functional safety
This part is under consideration.
IEC 63044-4 sets the requirements for functional safety for HBESIBACS products and systems. The requirements may also apply to the distributed functions of any equipment connected in a home or building control system If no specific functional safety standard exists for this equipment or system. IEC 63044-4 does not provide functional safety requirements for safety-related systems.
5.4 Part 5: EMC requirements
5.4.1 Overview
This product family standard sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices.
It also applies to devices used within a HBES/BACS network for which no specific HBES/BACS product EMC standard exists.
In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.EN 63044-1-2017 pdf download.

                                           Related Information                                             Download
PS:Thank you for your support!
EN 152-1:1988 pdf download EN Standards

EN 152-1:1988 pdf download

EN 152-1:1988 pdf download,Test methods for wood preservatives;Laboratory method for determining the preventive effectivenessof a preservative treatment against blue stain in service Part 1:Brushing procedure. The test method described in this European Standard is a laboratory method...
Read More
EN 74:1988 pdf download EN Standards

EN 74:1988 pdf download

EN 74:1988 pdf download.Cooplers,loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes; Requirements and test procedures Key words Steel tubes,Scaffolding,Fasteners,Pipe fittings,Centring pins,Supports,Equipment specifications,Inspection methods,Sampling,Mechanical tests.
Read More
EN 50061:1988 pdf download EN Standards

EN 50061:1988 pdf download

EN 50061:1988 pdf download,Safety of implantable cardiac pacemakers. This standard EN 50061:1988 specifies safety and other requirementsexclusively for all types of wholly implantable cardiac PACEMAKERS. This standard EN 50061:1988 also establishes basic terminology and definitions and includes...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information