AIA/NAS 1740-2013 pdf download RIVET, BLIND, SELF-PLUGGING, MECHANICALLY LOCKED SPINDLE, BULBED
1 .0 SCOPE
1.1 Scope. This specification establishes the requirements for procurement of self-plugging blind rivets, with a mechanically locked spindle, which can be installed in assemblies or construction where access to only one side is available. These rivets are intended for use in aircraft structural or similar applications in both thick and thin sheets. The bulbed blind head configuration makes these rivets especially suited for thin sheet or double dimple applications.
1.2 Classes and Types. Rivets shall be furnished in the following classes and types.
Class 1: Protruding Head Rivets
Type A – 2219 Aluminum Alloy Sleeve, Nickel Alloy 600 Spindle
Type B – 5056 Aluminum Alloy Sleeve, Alloy Steel Spindle
Type C – Nickel Alloy 600 Sleeve, A286 CRES Spindle (NAS1738)
A286 CRES Sleeve, A286 CRES Spindle (NAS1768)
Type D – 2017 Aluminum Alloy Sleeve, 7075 Aluminum Alloy Spindle (NAS1768)
Type E – 5056 Aluminum Alloy Sleeve, Nickel Alloy 600 Spindle
Type M – Nickel-Copper Sleeve, Nickel Alloy 600 Spindle (NAS1738)
Nickel-Copper Sleeve and Nickel-Copper Spindle (NAS1768)
Class 2: 100° Flush Head Rivets
Type A – 2219 Aluminum Alloy Sleeve, Nickel Alloy 600 Spindle
Type B – 5056 Aluminum Alloy Sleeve, Alloy Steel Spindle
Type C – Nickel Alloy 600 Sleeve, A286 CRES Spindle (NAS1739)
A286 CRES Sleeve A286 CRES Spindle (NAS1769)
Type D – 2017 Aluminum Alloy Sleeve, 7075 Aluminum Alloy Spindle (NAS1769)
Type E – 5056 Aluminum Alloy Sleeve, Nickel Alloy 600 Spindle
Type M – Nickel-Copper Sleeve, Nickel Alloy 600 Spindle (NAS1739)
Nickel-Copper Sleeve and Nickel-Copper Spindle (NAS1769)
2.0 APPLICABLE DOCUMENTS
2.1 Publications. The following publications of the issue in effect on the date of invitation for bids shall form a part of this specification to the extent specified herein.
2.1.1 Federal Specifications
QQ-A-430 Aluminum Alloy Rod and Wire for Rivets and Cold Heading
QQ-N-281 Nickel-Copper-Alloy (Nickel-Copper and R-Nickel-Copper) Bars, Plates, Rods, Sheets, Strips, Wire, Forgings and Structural and Special Shaped Sections
MIL-STD-2073/1 Standard Practice for Military Packaging
Copies can be obtained from the Department of Defense Single Stock Point (DODSSP). http://dodssp.daps.dla.mil
2.1.2 Industry Specifications
SAE International
AMS-QQ-P-416 Plating, Cadmium (Electrodeposited)
AMS2759 Heat Treatment of Steel Parts, General Requirements
AMS5665 (UNS N06600) Alloy Bars, Forgings and Rings, Corrosion and Heat Resistant
AMS5687 (UNS N06600) Alloy Wire, Corrosion and Heat Resistant
AMS5732 (UNS S66286) Steel Bars, Forgings, Tubing and Rings, Corrosion and Heat Resistant
AMS5737 (UNS S66286) Steel Bars, Forgings and Tubing, Corrosion and Heat Resistant
AMS6322 (UNS G87400) Steel Bars, Forgings and Rings
AMS2770 Heat Treatment of Wrought Aluminum Alloys
AMS-H-6875 Heat Treatment for Steel, Process For
Copies can be obtained from SAE International, 400 Commonwealth Dr., Warrendale, PA 15096-0001. www.sae.org
ASTM International
ASTM D3951 Standard Practice for Commercial Packaging
Copies can be obtained from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA
19428-2959. www.astm.org
American Society for Quality
ANSI/ASQ Z1.4 Sampling Procedures and Tables for Inspection by Attributes
Copies can be obtained from the American Society for Quality, 600 North Plankinton Ave., Milwaukee, WI 53203.
www.asq.org
2.1.3 Standards
Military
MIL-STD-129 Marking For Shipment and Storage
Copies can be obtained from the Department of Defense Single Stock Point (DODSSP). http://dodssp.daps.dla.mil
Aerospace Industries Association
NAS1738 Rivet, Blind Protruding Head, Mechanically Locked Spindle, Bulbed
NAS1739 Rivet, Blind, 100° Flush Head, Mechanically Locked Spindle, Bulbed
NAS1768 Rivet, Blind Protruding Head, Mechanically Locked Spindle, Bulbed
NAS1769 Rivet, Blind, 100° Flush Head, Mechanically Locked Spindle, Bulbed
NASM33522 Rivets For Blind Attachment, Limitations For Design And Usage
NASM1312 Fastener Test Methods