AIA/NAS 3405-2013 pdf download BAG, TRANSPARENT, SINGLE ITEM, WITH ACCESSORIES
1 .0 SCOPE: This standard provides a method for the packaging of an item (with associated loose items) in a transparent, flexible plastic bag.
2.0 REFERENCES
2.1 General Packaging Standard NAS850
3.0 REQUIREMENTS
3.1 General
3.1 .1 Requirements of General Packaging Standard NAS850 are a part of this standard except as noted herein.
3.2 Unit Packaging
3.2.1 The quantity per unit package shall be as follows unless otherwise specified by the procurement document:
One (1 ) each
3.2.2 Package item in a suitable size bag fabricated of transparent plastic.
3.2.3 Before closure of bag, package loose component item or items (except rubber items) required per major item in another suitable size plastic bag, and insert into the item bag.
3.2.4 The loose component item or items (except rubber) may be sealed in a separate compartment or corner of the item bag separate from the main item or items may be fastened to the body of the item as a substitute for inner bag.
3.2.5 Any loose rubber item or items required per major item shall be wrapped or bagged in opaque material and inserted into the item bag.
3.2.6 The closure of the bag should be by any method that would provide intended protection.
3.3 Intermediate Packaging
3.3.1 Intermediate packaging shall be in accordance with applicable requirements of NAS850.
3.4 Packing
3.4.1 Exterior packing shall be in accordance with applicable requirements of NAS850.
3.5 Marking
3.5.1 Unit, intermediate, and exterior containers shall be marked in accordance with applicable requirements of NAS850.
4.0 QUALITY ASSURANCE
4.1 Packages which do not conform to these requirements are subject to rejection and return to supplier at his expense.