Note: The primary purpose of AWS is to serve and benefit its members. To this end, AWS provides a forum for the exchange, consideration, and disussion of ideas and proposals that are relevant to the welding industry and the consen-sus of which forms the basis for these standards. By providing such a forum, AWS does not ssumne any dutics to which a user of these standards may be required to adhere. By publishing this standard, the American Welding Society does not insure amyone using the information it contains against any liability arising from that use. Publication of a standard by the American Welding Society does not carry with it any right to make, use, or sell any patented items. Users of the information in this standard should make an independent investigation of the validity of that information for their partic-ular use and the patent status of any item referred to herein.
This standard is subject to revision at any time by the AWS Fller Metal Comitee. It must be reviewed every five .years and if not revised, it must be either reapproved or withdrawn. Comments (recommendations, additions, or delc-tions) and any pertinent data that may be of use in improving this standard are requested and should be addressed to AWS Headquarters. Such comments will receive careful considerations by the AWS Filler Metal Committee and the author of the comments will be informned of the comitee’s response to the comments. Guests are invited to atend all meetings of the AWS Fller Metal Commite to express their comments verbally. Procedures for appeal of an adverse decision concerming all such comments are provided in the Rules of Operation of the Technical Activities Comittee.
A copy of these Rules can be obtained from the American Welding Society, 550 N.W. LeJeune Road, P. O. Box 35 1040, Miami, Florida 33 I35.