ANSI SAIA-A92.8-2006 pdf download Vehicle-Mounted Bridge Inspection and Maintenance Devices
2.2.1 Effective Dates. This Standard will become effective September 5, 2012 as follows:
(1) Design, manufacture and remanufacture requirements. The design and manufacturing requirements of this Standard will apply to all mobile units manufactured on or after the effective date. Bridge Inspection and Maintenance Devices remanufactured on or after the effective date of this Standard shall comply with the requirements of this Standard.
(2) Rebuilt/reconditioned Bridge Inspection and Maintenance Devices shall comply with the standard in effect as of the date of their original manufacture.
(3) Installation Requirements. The installation requirements of this Standard apply to all Bridge Inspection and Maintenance Devices installed on or after the effective date.
(4) Responsibilities for installers, dealers, owners, users, operators, lessors, lessees, and brokers. All provisions detailed for dealers, owners, users, operators, lessors, lessees, and brokers apply to both new and existing units delivered by sale, lease, rental, or any form of beneficial use on or after the effective date.
2.3 Requirements. The requirements of this Standard shall be met or exceeded.
3 Referenced and related American National Standards and Scaffold Industry Association publications
3.1 Referenced American National Standards. This standard is intended to be used in conjunction with the following American National Standards. When these referenced standards are superseded by a revision approved by the American National Standards Institute, the revision shall apply:
ANSI Z535.1-2006, Safety Color Code
ANSI Z535.3-2007, Criteria for Safety Symbols
ANSI Z535.4-2007, Product Safety Signs and Labels
ANSI/AWS D 1.1-2010. Structural Welding Code Steel
3.2 Other referenced Standards and Regulations. This Standard is also intended to be used in conjunction with the following standards: SAE J821 – 1994 for Electrical Systems for Construction, Agriculture and Off-Road Machines Code of Federal Regulations (CFR) 1910.333
3.3 Related American National Standards. The standards listed here are for information only and are not essential for the completion of the requirements of this Standard. Where these related Standards are superceded by a revision approved by the American Standards Institute, the revision shall apply.