ANSI SCTE-177-2012 pdf download Specification for Braided 75 Ω, Mini-Series Quad Shield Coaxial Cable for CMTS and SDI cables
8.0 NORMATIVE REFERENCES The following documents contain provisions that, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreement based on this standard are encouraged to investigate the possibility of applying the most recent edition of the documents listed below.
1. ANSI/SCTE 03 2008: Test Method for Coaxial Cable Structural Return Loss.
2. ANSI/SCTE 31 2007: Test Method for Measuring Diameter Over Core.
3. ANSI/SCTE 32 2009: Ampacity of Coaxial Telecommunications Cables.
4. ANSI/SCTE 33 2010: Test Method for Diameter of Drop Cable.
5. ANSI/SCTE 44 2010: Test Method for DC Loop Resistance
6. ANSI/SCTE 47 2007: Test Method for Coaxial Cable Attenuation.
7. ANSI/SCTE 48-3 2011: Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell
8. ANSI/SCTE 49 2011: Test Method for Velocity of Propagation.
9. ANSI/SCTE 51 2007: Test Method for Determining Drop Cable Braid Coverage.
10. ANSI/SCTE 59 2007: Test Method for Drop Cable Center Conductor Bond to Dielectric
11. ANSI/SCTE 66 2008: Test Method for Coaxial Cable Impedance.
12. ANSI/SCTE 73 2002R2007: Test Method for Insertion Force of Connector to Drop Cable Interface.
13. ANSI/SCTE 88 2007: Test Method for Polyethylene Jacket Longitudinal Shrinkage.
14. ANSI/SCTE 108 2006: Test Method for Dielectric Strength Withstand of Coaxial Cable.
15. ANSI/UL1581-2001: Reference Standard for Electrical Wires, Cables and Flexible Cords.
16. ASTM D1248-05: Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable.
17. ASTM D 4565-99(2004): Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable.
18. ASTM B33-04: Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
19. IEC 61196-1-314: Coaxial communication cables – Part 1-314: Mechanical test methods – Test for bending
20. IEC 62153-4-4: Metallic communication cable test methods – Part 4-4:
Electromagnetic compatibility (EMC) – Shielded screening attenuation, test method for measuring of the screening attenuation a s up to and above 3 GHz
21. NEC ® -2011 Article 800: Communication Circuits.
9.0 INFORMATIVE REFERENCES
The following documents may provide valuable information to the reader but are not required when complying with this standard.
1. ANSI/SCTE 69 2007: Test Method for Moisture Inhibitor Corrosion Resistance.
2. ANSI/SCTE 166 2010: Flexure Method for Drop Cable Conditioning
3. ASTM B1-01(2007): Standard Specification for Hard-Drawn Copper Wire.
4. ASTM B193-02(2008): Resistivity of Electrical Conductive Materials.
5. ASTM B3-01(2007): Standard Specification for Soft or Annealed Copper Wire.
6. ASTM B566-04a: Standard Specification for Copper-Clad Aluminum Wire.
7. Jones Dictionary: Cable Television Terminology 3rd Edition.