ASME A112-19-10:2003 pdf download DUALFLUSH DEVICES FOR WATERCLOSETS
GENERAL1
1.1 Scope
This Standard covers physical and performancerequirements and test methods pertaining to dual flushdevices that are installed within water closet tanks whichuse 3.5 gpf (13.2 Lpf) or greater volume, to reduce totalvolumetric water consumption.
12 Units of Measurement
Values are stated in U.S. customary units and in theInternational System of Units (SI). The US. customaryunits shall be considered as the standard.
In this Standard, gallons per flush is abbreviated gpfand liters per flush is abbreviated Lpf.
1.3 References
The following documents form a part of this Standardto the extent specified herein, Unless otherwise specified, the latest edition shall apply.
ASME A112.19.2M,Vitreous China Plumbing FixturesASME A11219.6,Hydraulic Performance Requirementsfor Water Closets and UrinalsPublisher: The American Society of Mechanical Engineers(ASME International), Three Park Avenue, NewYork，NY 10016; Order Department: 22 Law Drive,Box 2300，Fairfield，NI 07007
14 Definitions
cycle time: the time beginning at the instant the flushrelease device is operated, and ending at the instant thewater supply valve is completely shut off and the waterstops flowing
dua! flush device: a mechanism for control of water closetdischarge that provides the user with two options forselective operation with either a normal fill volume ora reduced volume of water from the tank, The dual flushdevices are considered to be those which are capable ofproviding at least 30% reduction in water consumptionOnly activation by selection of one option by the userand a release of the actuation selector, without requiringfurther action or holding by the user, shall be requiredUser involvement devices that require further action orholding of the selector control to participate in the process of maintaining the selected operation mode andflush (single-option flush modifying devices or rapidclosure devices) are not covered in this Standard.
flapper valve: see flush valve.
flow pressure: the pressure in the water supply pipe atthe fixture fitting, valve, or water inlet while the fittingvalve or water outlet is flowing
flush tank (gravity type): a device that stores a specifiedquantity of water. When actuated, it discharges thequantity of water, plus some through-flow from thepotable water supply or other acceptable water sourcefor the water closet sanitary service, into the water closetbowl or urinal by gravity. It is often a container for ameasured quantity of water, fitted with an inlet valveball cock) and a flush valve, and is either wall-hung orclose-coupled (with closet bowl).flush valve: a special form of valve located at the bottomof a flush tank used to control the discharge of waterfrom the tank into a water closet or urinal.sanifary: reasonably acceptable appearance and not nec-essarily microbiologically clean.
water closet: a plumbing fixture having a water-containing receptor that receives liquid and solid bodywaste and, upon actuation, conveys the waste throughan exposed integral trap seal into a gravity drainagesystem.
water savings: the amount of flush volume water reduc-tion in gallons or percentage when comparing consumption with and without a dual flush device for a watercloset.
water surface: the surface of the still water in the watercloset bowl when filled to the trap weir.