ASME N510:2007 pdf download Testing of Nuclear Air Treatment Systems
SCOPE
This Standard covers in-service testing of ASME N509high-efficiency air treatment systems for nuclear powerplants.
1.1 Use of This Standard
This Standard provides a basis for the developmentof test programs and does not include acceptance criteriaexcept where the results of one test influence the performance of other tests. Acceptance criteria shall bcdeveloped based on the design/function in accordancewith ASME N509
This Standard is arranged so that the user may selectthose portions (tests) that are relevant to their application. Tests should be performed in the sequence listecin Table 1. Table 1 also lists the recommended minimumfrequency for performing these tests. The user mustspecify which tests shall be performed, and the acceptance criteria for those tests, in the test program.
12 Limitations of This Standard
This Standard covers the in-service (operational) testing of installed air treatment systems. This Standardshall be applied in its entirety to systems designed andbuilt to ASME N509 specifications,Sections of thisStandard may be used for technical guidance for testingair treatment systems designed to other criteriaASME AG-1，Section TA covers the acceptance-testingprogram.
2REFERENCES
The following references supplement this Standardand are part of it to the extent indicated in the text, Theissue (date/revision) of the referenced document notecbelow shall be in effect. If no date is listed, then theissue of the referenced document in effect at the timeof the purchase order shall apply ASME AG-1 containscode requirements for nuclear air and gas treatmentequipment. These code requirements may be substitutedfor the requirements listed herein.
Industrial Ventilation: A Manual of RecommendedPractice (24th edition)Publisher: American Conference of GovernmentalIndustrial Hygienists (ACGIH)，1330 KemperMeadow Drive.Cincinnati,OH 45240
ANS 3.1-1993，Selection, Qualification, and Training ofNuclear Power Plant Personnel
Publisher: American Nuclear Society (ANS),555 NorthKensington Avenue,LaGrange Park,IL 60526
ASME AG-1 Code on Nuclear Air and Gas TreatmentASME N509，Nuclear Power Plant Air-Cleaning Unitsand ComponentsASME N511, Standard for In-Service Testing of NuclearAir Treatment，Heating，Ventilating，and AirConditioning SystemsASME NOA-1， Quality Assurance ProgramRequirements for Nuclear Facilities
Publisher: The American Society of MechanicalEngineers (ASME)，Three Park Avenue,New YorkNY 10016-5990;Order Department: 22 Law DrivePO.Box 2300,Fairfield,NJ 07007-2300
ASTM D 3803-1991，Standard Test Method forRadioiodine Testing of Nuclear-Grade Gas PhaseAdsorbents
Publisher: ASTMInternational(ASTM)100 Barr HarborDrive，PO.Box C700.West Conshohocken.PA19428-2959
Procedural Standards for Testing,Adjusting,andBalancing of Environmental Systems,1998Publisher: National Environmental Balancing Bureau(NEBB)，8575 Grovemont Circle，Gaithersburg，MD20877
HVAC Systems Testing，Adjusting,and Balancing1993-2
Publisher: Sheet Metal and Air ConditioningContractors’National Association (SMACNA)4201Lafayette Center Drive,Chantilly, VA 20151-1209
DEFINITIONS
The definitions provided in this section supplementthose listed in ASME AG-1 Section AA-1000.activafed carbon: an adsorbent of porous structure manufactured by carbonization of organic material and con-trolled oxidation to increase its microporosity, consistingmainly of elemental carbon in a porous structure.