ASME SB210:2004 pdf download SPECIFICATION FOR ALUMINUM AND ALUMINUM- ALLOY DRA WN SEAMLESS TUBES
1Scope
1.1 This specification covers aluminum and aluminum-alloy drawn seamless tubes in straight lengths andcoils for general purpose and pressure applications inalloys (Note 2), tempers, and thicknesses shown in Table2. Coiled tubes are generally available only as roundtubes with a wall thickness not exceeding 0.083 in. andonly in nonheat-treatable alloys.
1.2 Alloy and temper designations are in accordancewith ANSI H35.1.The equivalent Unified NumberingSystem alloy designations are those of Table 1 precededby A9, for example, A91100 for aluminum designation1100 in accordance with Practice E 527.
NOTE 1 — See Specification SB-234 for aluminum-alloy drawn seamless tubes for condensers and heat exchangers; and Specification SB241/SB-241M for aluminum-alloy seamless pipe and seamlessextruded tube.NOTE 2 – Throughout this specification, use of the term alloy in thegeneral sense includes aluminum as well as aluminum alloy.
1.3 A complete metric companion to SpecificationB 210 has been developed Specification B 210M:therefore, no metric equivalents are presented in this specification
14 For acceptance criteria for inclusion ofnew aluminum and aluminum alloys in this specification, seeAnnex A2.
2.Referenced Documents
2.1 The following documents of the issue in effecton date of material purchase form a part of this specifica-tion to the extent referenced herein:
2.1.1 ASTM Standards
B 557 Test Methods of Tension Testing Wrought andCast Aluminum- and Magnesium-Alloy Products
B 597 Practice for Heat Treatment of Aluminum AlloysB 660 Practices for Packaging/Packing of Aluminum andMagnesium Products
B 666/B 666M Practice for Identification Marking ofAluminum ProductsE 29 Practice for Using Significant Digits in Test Datato Determine Conformance With SpecificationsE 34 Test Methods for Chemical Analysis of Aluminumand Aluminum-Base Alloys
E 55 Practice for Sampling Wrought Nonferrous Metalsand Alloys for Determination of Chemical Compo-sition
E 101 Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique
E 215 Practice for Standardizing Equipment for Electro-magnetic Examination of Seamless Aluminum-AlloyTube
E 227 Test Method for Optical Emission SpectrometricAnalysis of Aluminum and Aluminum Alloys by thePoint-to-Plane Technique
E 527 Practice for Numbering Metals and Alloys (UNS)E 607 Test Method for Optical Emission SpectrometricAnalysis of Aluminum and Aluminum Alloys by thePoint-to-Plane Technique, Nitrogen AtmosphereE 716 Practices for Sampling Aluminum and AluminumAlloys for Spectrochemical Analysis
E 1004 Test Method for Electromagnetic (Eddy-Current)Measurements of Electrical Conductivity
E 1251 Test Method for Optical Emission SpectrometricAnalysis of Aluminum and Aluminum Alloys by theArgon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge