ASME Y14.34M:1996 pdf download ASSOGIATED LISTS
1 SCOPE
This Standard establishes the minimum requirementsfor the preparation and revision of parts lists, applicationlists, data lists, and index lists, In addition, this Standardpresents certain options that may be incorporated intoparts lists, data lists, index lists, application lists, indentured data lists, and wire lists at the discretion of the design activity.
2 APPLICABLE DOCUMENTS
When the following American National Standards re-ferred to in this Standard are superseded by a revisionapproved by the American National Standards Institute.the revision shall apply.
2.1 American National Standards
ASME Y14.1-1995,Decimal Inch Drawing Sheet Sizeand FormatASME Y14.1M-1995,Metric Drawing Sheet Size andFormat
ASME Y14.2M Line Conventions and LetteringASME Y14.35M-1997, Revision of Engineering
Drawings and Associated DocumentsIEEE 200-1975(R1989)(ANSI Y32.16-1975)Refer-ence Designations for Electrical and Electronic Partsand Equipment
2.2 United States Government DocumentsCataloging Handbook H4/H8, CommercialandGovernment Entity (CAGE)
3 DEFINITIONS
alphanumeric arrangement: for a designation in a list. agrouping of mixed symbols, numbers, and letters used toform the designation. These are arranged so that the firstcharacter in the designation aligns in the furthest leftmostposition in the column. For each designation in the column, the first position characters are arranged by sym
bols, e.g., a dash symbol, then numerically, then alphabetically,as applicable. Succeeding characters in the second position (and subsequent positions) are next arrangedby symbol, then numerically, then alphabetically in thesame manner as the first position. Designations composedonly of single characters shall be arranged first within acolumn list, followed by those with a dash in the secondcharacter position.Next, after the dash second characterposition, shall come the numerical second position characters,then the alphabetical second position characters.These procedures are applicable for all remaining character positions within designations.
application data: the next assembly(ies) and the modelnumber,nomenclature,or equivalent designator of the as-sembled unit(s), of which a part or assembly is a component.
application list (AL): application data presented in a separate list. See Fig. 13.
approval: an indication that the document meets generalrequirements for preparation and content. An entry doesnot indicate approval of the design depicted on the related drawing.
bulk iters constituents of an assembly or part, such as oil.wax，cement,ink, grease,flux,welding rod,twine, orchain. that satisfies one or more of the following criteria(a) the quantity is not readily predetermined;
(b) the physical nature of the material is such that itis not adaptable to pictorial representation;
(c) the finished size is obtainable through use of suchtools, such as shears, pliers, or knives, without furthermachining operation, and the final configuration is suchthat it can be described in writing without the necessityof pictorial representation.
CAGE Code(Commercial and Government Entity Code):a code assigned by the government to identify a firmwhich designs, manufactures, or supplies items.
data list (DL): a tabulation of all engineering drawingsassociated lists,specifications, standards, and subordinatedata lists pertaining to the item to which the data list ap