AIA/NAS 6913-2012 pdf download PIN, SWAGE LOCKING, PH1 3-8Mo CRES, 1 00º CROWN HEAD, SHEAR, PULL-TYPE
MATERIAL:
PH13-3Mo (UNS S13800) PER AMS5629.
HEAT TREATMENT:
SOLUTION AND PRECIPITATION HEAT TREATED TO CONDITION H1000.
MINIMUM SHEAR STRENGTH 125 KSI.
NISH:
PASSIVATE IN ACCORDANCE WITH AMS2700, METHOD 1, CLASS 4.
LUBRICATION:
DRY FILM LUBRICANT PER MIL-PRF-46010 AS5272, TYPE I AND CETYL ALCOHOL PER MIL-L-87132 AS87132.
CODE:
FIRST DASH NUMBER DESIGNATES NOMINAL DIAMETER IN .03125 INCREMENTS.
SECOND DASH NUMBER DESIGNATES MAXIMUM GRIP LENGTH IN .062 INCREMENTS.
ADD “H” AFTER BASIC NUMBER WHEN SEALANT ESCAPE GROOVE IS REQUIRED.
EXAMPLES OF PART NUMBER:
NAS6913-08-08 = Ø.2500, PH13-8Mo CRES, 100° CROWN HEAD, PULL-TYPE, .500 GRIP.
NAS6913H08-08 = Ø.2500, PH13-8Mo CRES, 100° CROWN HEAD, SEALANT ESCAPE GROOVE, PULLTYPE, .500 GRIP.
NOTES:
(1) DIMENSIONS IN INCHES AND APPLY AFTER FINISH AND PRIOR TO THE APPLICATION OF LUBRICATION UNLESS OTHERWISE SPECIFIED.
(2) FOR RECOMMENDED HOLE SIZE, SEE NAS618.
(3) FOR COLLAR SELECTION, MINIMUM TENSILE STRENGTH, AND INSPECTION GAGE, SEE NAS1080.
(4) UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED.
/5/ RADIUS TO BE TANGENT TO SHANK AND 18°/12° ANGLE.
(6) THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.