AIA/NAS 6965-6972-2013 pdf download PIN, SWAGE LOCKING, A286 CRES, PROTRUDING HEAD, TENSION, PULL-TYPE
MATERIAL:
A286 CRES – (UNS S66286) PER AMS5732 OR AMS5737.
HEAT TREATMENT:
SOLUTION TREATED AND AGED. MINIMUM SHEAR STRENGTH 95 KSI.
FINISH:
PASSIVATE PER AMS2700, METHOD 1 , CLASS 4.
CADMIUM PLATE PER AMS-QQ-P-41 6, TYPE II CLASS 2.
NICKEL-CADMIUM PLATING PER AMS241 6.
LUBRICATION:
CETYL ALCOHOL PER PROCUREMENT SPECIFICATION.
CODE:
DASH NUMBER DESIGNATES NOMINAL GRIP IN .0625 INCREMENTS.
ADD “C” AFTER BASIC NUMBER FOR TYPE II CADMIUM PLATING.
ADD “N” AFTER BASIC NUMBER FOR NICKEL-CADMIUM PLATING.
ADD “H” AFTER BASIC NUMBER WHEN SEALANT ESCAPE GROOVE IS REQUIRED.
EXAMPLES OF PART NUMBER:
NAS6966-08 = Ø.1 90, A286 CRES PIN, PROTRUDING HEAD, PULL TYPE, .500 GRIP.
NAS6966C08 = Ø.1 90, A286 CRES PIN, PROTRUDING HEAD, PULL TYPE, .500 GRIP, TYPE II CADMIUM PLATE.
NAS6966N08 = Ø.1 90, A286 CRES PIN, PROTRUDING HEAD, PULL TYPE, .500 GRIP, NICKEL-CADMIUM PLATE.
NAS6966H08 = Ø.1 90, A286 CRES PIN, PROTRUDING HEAD, SEALANT ESCAPE GROOVE, PULL TYPE,.500 GRIP.
NAS6966HC08 = Ø.1 90, A286 CRES PIN, PROTRUDING HEAD, SEALANT ESCAPE GROOVE, PULL TYPE,.500 GRIP, TYPE II CADMIUM PLATE.
NAS6966HN08 = Ø.1 90, A286 CRES PIN, PROTRUDING HEAD, SEALANT ESCAPE GROOVE, PULL TYPE,.500 GRIP, NICKEL-CADMIUM PLATE.
NOTES:
(1 ) DIMENSIONS IN INCHES AND APPLY AFTER FINISH AND PRIOR TO THE APPLICATION OF LUBRICATION EXCEPT PARTS WITH NICKEL-CADMIUM MAY HAVE DIMENSIONS INCREASED BY .0005.
(2) FOR RECOMMENDED HOLE SIZES, SEE NAS61 8.
(3) FOR COLLAR SELECTION, MINIMUM TENSILE STRENGTH, AND INSPECTION GAGE, SEE NAS1 080.
/4/ SLIGHT HOOK PERMITTED WHERE TAPER OF LOCKING GROOVE MEETS TAPER OF ORIGINAL BLANK.