ANSI SCTE-26-2010 pdf download Home Digital Network Interface Specification with Copy Protection
This specification defines an MPEG-2 systems standard, including Transport Stream encoding. ISO/IEC 13818-1 is normative and required for devices complying with this standard. 8. ATSC A/53 Digital Television Standard, Parts 1 through 6 ATSC A/53, available from http://www.atsc.org/, is normative and required for devices complying with this standard. A/53 Parts 1, 3, and 4: 2009, Parts 2, 5, and 6: 2007.
9. CEA-775-C, DTV 1394 Interface Specification, September 2008 This is a general specification for a DTV receiver equipped with a 1394 interface. Also, the CEA-775 standard defines a data structure, the EIA Unit Identifier Descriptor, that allows the Host Device to discover the capabilities of the DTV receiver. CEA standards can be purchased from Global Engineering Documents, http://global.ihs.com/.
10. CEA-799-A, On-Screen Display Specification, July 2006 This standard defines a format and method of delivery for on-screen display (OSD) data and the syntax and semantics of the subframes that define the OSD data.
11. ANSI/SCTE 41 2004 POD Copy Protection System This specifies the copy protection system used on the CableCARD-Host interface.
12. ANSI/SCTE 54 2009, Digital Video Service Multiplex and Transport System Standard for Cable Television
13. ANSI/SCTE 43 2005, Digital Video Systems Characteristics Standard for Cable Television
14. CEA-931-C Remote Control Command Pass-Through Standard for Home Networking, December 2007 2.2 Informative References The following standards and specifications are informative references.
15. IPv4 over IEEE 1394 This specification, http://www.ietf.org/rfc/rfc2734.txt, describes the mapping of Internet Protocol (IP) to IEEE 1394. Devices use this protocol for IP data transfer, including such applications as e-mail, web browsing, and file transfer.