BS/EN 4611-002-2018 pdf download.Aerospace series – Cables, electrical, for general purpose, single and multicore assembly – XLETFE Family Part 002: General.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2084. Aerospace series — Cables, electrical, general purpose, with conductors in copper or copper alloy — Technical specification
Ett4Z51.0iL Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General
FJi3838. Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables
ISO 2635. Aircraft — Conductorsforgeneral purpose aircraft electrical cables and aerospace applications — Dimensions and characteristic’)
2)3 Terms, definitions, symbols and abbreviations
For the purposes of this document, the following terms definitions, symbols and abbreviations given in EN 3475-100 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• I EC Elect ropedia: available at http://www.clectropedia.org/
• ISO Online browsing platform: available at htt/www.isa.org/obp
4 List of product standards
ENAM1I103. Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 003: Tin plated copper — Operating temperatures, between — 65 °C and 135 °C — Single extruded wall for enclosed applications — UV laser printable — Product standard
EN 4611-004. Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 004: Tin plated copper — Operating temperatures, between — 65 °C and 135 °C — Dual extruded wall for open applications — UV laser printable — Product standard
EN 4611-005. Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 005: Silver plated copper — Operating temperatures, between – 65 °C and 150 °C — Single extruded wall for enclosed applications — UV laser printable — Product standard
EN 4611-006. Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 006: Silver plated copper — Operating temperatures, between – 65°C and 150 °C — Dual extruded wall for open applications — UV laser printable — Product standard
EN 4611-007. Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 007. Nickel plated copper — Operating temperatures, between — 65 °C and 150
— Dual extruded wall for open applications — UV laser printable — Product standard
EN 4611-008. Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 000: OP — Nickel plated copper — Operating temperatures, between — 65 °C and 150 °C — Dual extruded wall for open applications, with additional protection in areas of high vibration, cable flexing and fluid contamination — UVlaser printable — Product standard
Aerospace series — Cables, electrical, for general purpose, single and multicore assembly — XLETFE Family — Part 009: 13] — Nickel plated copper — Operating temperatures, between — 65 °C and
150 °C — Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable
flexing and fluid contamination — UV laser printable — Product standard
5 Materials and construction
5.1 Materials
The cable conductors shall be made of copper or copper alloy and nickel or silver or tin-plated conforming to ISO 2635 Table 2 or as specified in product standards.
5.2 Construction
5.2.1 General
See individual product standards.
5.2.2 Cores
Number of cores. see Table 1.
6 Identification and marking
The identification and marking of cables by the manufacturer shall be In accordance with EN 2084.
As the designation, required for orders, is generally too long, for use in electrical drawings a shorter designation (without colour information) is given in TR 6058.
For multicore cable with jacket, the marking shall be optional on core(s) and mandatory on jacket.
For multicore cable without jacket, each core shall be marked with his own designation.
The cables (single core or jacketed cable) shall be capable of being printed with user-applied UV laser
markings according to EN 3838. Aggressive marking techniques are not permitted.
7 Technical specification
See EN 2084.BS/EN 4611-002-2018 pdf download.