PD PAS 60936-5:2003 pdf download Maritime navigation and radiocommunication equipment and systems — Radar — Part 5: Guidelines for the use and display of AIS information on radar
Scope
This document specifies the minimum operational and performance requirements, methods ottesting and required test results and the effect on extant standards, that are recommended tobe complied with for optional equipment conforming to nterim Operational Guidelines notinferior to those adopted by the lMO in SN/Circ.217 (11 July 2001) – lnterim guidelines for thepresentation and display of AlS target information. The scope is further restricted torequirements for superimposition of selected parts of AlS information on radar systems. Altext of this standard, which is identical to that in IMO SN/Circ.217 is printed in italics and theCircular and paragraph numbers are indicated in brackets, for example – (C.217/3.3).
The interim guidelines deal with the graphical presentation, alphanumeric information and thedisplay of AIS target data in standalone or integrated navigational aids or systems and areconsidered as an interim performance guideline, They should be replaced by the appropriateperformance standards after experience has been gained.(C.21712)
The fusion of AlS and radar plotting (RP) data and information is not detailed in this guidelineas it is only permitted when the functionality meets the requirements of an IntegratedNavigation System as specified in the relevant IMO Performance Standards.
2 Application
2.1Intended use of these guidelines
These guidelines are intended to apply to all SOLAS ship’s radar and radar plotting displayscomplying to IMO MSC.64(67) Annex 4′),IMO A.820(19)) and IMO A.823(19)’)
2.2Intended application of these guidelines
The application of these Guidelines is intended to reduce OoW workload, provide commontraining and enhance situation awareness for safety.
2.3Effects of these guidelines on existing radar
The effect of these guidelines on the extant radar and radar plotting standards is given inAnnex A.
3 Normative references
The following referenced documents are indispensable for the application of this documentFor dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.
IEC 60872-1:1998，Maritime navigation and radiocommunication eqguipment and systems -Radar plotting aids – Part 1: Automatic radar plotting aids (ARPA) – Methods of testing andrequired test results
4Definitions and abbreviations
4.1Definitions
4.1.1
AIS Symbol 1 – Sleeping target
target symbol indicating the presence and orientation of a vessel equipped with AlS in acertain location, No additional information is presented until AlS targets are activated, thusavoiding information overload.(C217/1)
4.1.2AIS Symbol 2a, b,c – Activated targetsymbol representing the automatic or manual activation of a sleeping target for the display ofadditional graphically presented information,including:
a vector (speed and course over ground or water) (2a);
the heading (2a);and