SAE AS 39029-77-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 1 6 (FOR MIL-C-38999 SERIES I, III, AND AND IV CONNECTORS)
Vibration (random): Connectors shall be subjected to the test specified in method 2005 of MIL-STD-1 344. The following details shall apply:
a. Test condition V. Using the vibration envelope shown on figure 2. (Derived from zone 2 outlined in Aerospace Information Report AIR 1 557.)
b. Vibration to be conducted at standard test conditions.
c. Duration shall be 8 hours in the longitudinal direction and 8 hours in a perpendicular direction for a total of 1 6 hours.
Shock (high-impact): Wired and mated connectors shall be subjected to the test specified in MIL-S-901 , grade A with the following modifications and additions:
a. Connectors shall be coupled together by normal coupling means. All contacts shall be wired in a series circuit witih 1 00 milliamperes maximum current flow through the series circuit during high-impact shock. Connectors shall be monitored for any discontinuities. A detector capable of detecting all discontinuities in excess of 1 microsecond shall be
used.
b. Mounting fixture shall be in accordance with MIL-S-901 , light weight.
c. The cable or wire bundle shall be supported on a stationary frame in such a manner to provide a free flexing cable length between frame and fixture of not less than 36 inches (91 4.4 mm).
d. Test condition A. The plug shall be terminated with at least 80 percent of wired contacts. The wire bundle shall be provided with straight, open frame, strain relief accessory hardware.