SAE J1164-2000 pdf download Labeling of ROPS and FOPS and OPS
Scope–This SAE Standard establishes the specifications and content for labeling of ROPS,FOPS, and OPSwhich may commonly be a part of construction, forestry, mining, and industrial machines. The label contentherein shall be applied to a ROPS and/or FOPS and/or OPS on any of these machines.
Purpose-To provide a uniform content of labels on Rollover Protective Structures (ROPS) and/or FallingObject Protective Structures (FOPS) and/or Operator Protective Structures (OPS).
References
Applicable Publication–The following publication forms a part of the specification to the extent specifiedherein. Unless otherwise indicated, the latest revision of SAE publications shall apply.
SAE PUBLICATION-Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE J1116 JUN86-Categories of Off-Road Self-Propelled Work Machines, Sections 1, 2, 4, and 5
Label Specifications
The label shall be a permanent type and permanently attached to the structure.
The label and its content shall be of a size that is legible.
The label shall be located on the tructure where it can be read and is protected from environmental defacing
Label Content
The name and address of the manufacturer or fabricator with certification control of the ROPS and/or FOPSand/or OPS.
ROPS and/or FOPS and/or OPS model number, if any.
Machine make, model(s), or series number(s) the structure is designed to fit.
Maximum mass (weight) of machine for which the structure is certified.
List by number and date or subscript the specific SAE performance criteria met (for example, SAE J1040APR88SAE J231 JAN81SAE J1042 FEB86SAEJ1084 APR80).
A list of other performance criteria met may be included (such as ISO).
The manufacturer may include such other information as deemed appropriate, such as regulatoryrequirements,installation, repair or replacement information.
Notes
Marginal lndicia-The change bar () located in the left margin is for the convenience of the user in locatingareas where technical revisions have been made to the previous issue of the report. An (R) symbol to the leftof the document title indicates a complete revision of the report.