SAE J222-2000 pdf download Parking Lamps (Front Position Lamps)
Scope– This SAE Standard provides test procedures, requirements, and guidelines of parking lamps (front
position lamps).
References
2Applicable Publications– The following publications form a part of this specification to the extent specifiedherein. Unless otherwise specified, the latest issue of SAE publications shall apply.
2.1.1SAE P UBLICATIONS -Available from SAE.400 Commonwealth Drive. Warrendale. PA 15096-0001
2.2 SAE J567-Lamp Bulb Retention SystemSAE J575_Tests for Motor Vehicle Lighting Devices and ComponentsSAE J576–Plastic Materials for Use in Optical Parts Such as Lenses and Beflectors of Motor VehicleLighting DevicesSAEJ578-Color Specification
SAE J759Lighting ldentification Code
Related Publications– The following publications are provided for information purposes only and are not arequired part of this document.
2.2.1 SAE P UBLICATIONS -Aailable from SAE. 400 Commonwealth Drive. Warrendale, PA 15096-0001
SAE J592-Clearance, Side Marker, and ldentification LampsSAE J585-Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overal
Width
SAE J586 FEB84-Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall WidthSAE J588 NOV84–Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall WidthSAE J594-Reflex Reflectors
SAE J1395 APR85–Front and Rear Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More inOverall WidthSAE J1398 MAY85-Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall WidthSAE J1957-Central High Mounted Stop Lamp Standard for Use on Vehicles Less than 2032 mm OverallWidth
SAE J2040-Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall WidthSAE J2042-Clearance, Sidemarker, and ldentification Lamps for Use on Motor Vehicles 2032 mm orMore in Overall Width
2.2.2
FEDERAL PUBLICATION -Available from the Superintendent of Documents, U. S. Government Printing Ofice,Washington,DC 20402.
FMVSS No.108-Turn Signal Geometric Visibility Requirements (56 FR 64733-64737)
Definitions
Parking Lamps– Whether separate or in combination with other lamps, parking lamps are located on both thefront left and right of the vehicle which show to the front and are intended to mark the vehicle when parked.lnaddition, these front lamps serve as a reserve front position indicating system in the event of headlamp failure
Lighting ldentification Code- arking lamps may be identified by the code “p” in accordance with SAEJ759.
5Tests
SAE J575 is a part of this report. The following tests are applicable with the modifications as indicated:
5.1.1VIBRATION TEsT
5.1.2MOISTURE TEST
DUST TEST
5.1.3 5.1.4CORROSION TEsT
5.1.5PHOTOMETRY TEST-n addition to the test procedures in SAE J575, the following apply:
5.1.5.1Photometric measurements shall be made with the light source of the lamp at least 3 m from thephotometer. The H-V axis shall be taken as parallel to the axis of reference of the lamp as mounted on thevehicle.
5.1.6WARPAGE TEST FOR DEVICES WITH PLASTIC COMPONENTS
5.2Color Test SAE J578 is a part of this report
Requirements
6.1Performance Requirements- A device, when tested in accordance with the test procedures specified inSection 5 shall meet the following requirements.