UL 1026:2004 pdf download Electric Household Cooking and Food Serving Appliances
Scope1
1.1 These requirements cover electric household cooking and food serving appliances, rated at 250 V oiless, other than those mentioned in 1.2, for use in ordinary locations, including appliances intended forcasual and permanent outdoor use, in accordance with the National Electrical Code.
1.2 These requirements do not cover household electric ranges, electrode type appliances, skillets andfrying type appliances, fondues, woks, tempuras, corn poppers, coffee makers and brewing typeappliances, commercial cooking appliances, microwave cooking appliances, or appliances that arecovered in individual requirements that are separate from this standard.
1.3 In the following text, a requirement that applies to one type of equipment coming within its scopetoaster, and the like) will be so identified by a specific reference in that requirement to the type ofequipment involved. ln the absence of such specific reference of if the term “appliance” is employed, it isto be understood that the requirement applies to all of the types of equipment covered by the standard.
1.4 Deleted May 28, 2002
2 Components
2.1 Except as indicated in 2.2, a component of a product covered by this standard shall comply with therequirements for that component. See Appendix A for a list of standards covering components used in theproducts covered by this standard.
2.1 revised May 1, 2000
2.2 A component is not required to comply with a specific requirement that:
a) lnvolves a feature or characteristic not required in the application of the component in theproduct covered by this standard,or
b) ls superseded by a requirement in this standard.
2.2 revised May 1, 2000
2.3 A component shall be used in accordance with its rating established for the intended conditions ofuse.
2.3 revised May 1,2000
2.4 Specific components are incomplete in construction features or restricted in performance capabilities.Such components are intended for use only under limited conditions, such as certain temperatures notexceeding specified limits, and shall be used only under those specific conditions.
2.4 revised May 1, 2000
3 Units of Measurement
3.1 Values stated without parentheses are the requirement, Values in parentheses are explanatory orapproximate information.
3.1 revised May 1, 2000
4 References
4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall beinterpreted as referring to the latest edition of that code or standard.
CONSTRUCTION
5 General
5.1 lf the operation of an appliance involves the generation and confining under pressure of steam oiother gas, consideration shall be given to the possibility of an explosion risk incident to such operationThe appliance shall not be acceptable unless its strenath is adeauate with respect to any explosion riskthat may be involved.