SAE AS 27429-2000 pdf download SPLICE, CONDUCTOR, DISCONNECT, CRIMP STYLE, COPPER, INSULATED BARREL, TYPE II, CLASS 1 FOR 1 05°C TOTAL CONDUCTOR TEMPERATURE
1.MATERIAL
(a) FOR MS27429-1 AND MS27429-2:
ASTM-B-36-66 52T ALLOY NO. 230, DISCONNECT PORTION HARD TEMPER ROCKWELL B65 MINIMUM.ORASTM-B-152-66,DISCONNECT PORTION HARD TEMPER,ROCKWELL F92 MINIMUM.(b) FOR MS27429-3:ASTM-B-152-66 DISCONNECT PORTION HARD TEMPERROCKWELL F92 MINIMUM.(C) INSULATION SLEEVE: THERMOPLASTIC (NYLON OR POLYETHYLENE)
2.FINISH: ELECTRO-TIN,PLATE0001 INCH MINIMUM-THICKNESS TO MIL-T-10727
3. INDENT .015 MINIMUM TO PREVENT INCORRECT ASSEMBLING
4.RELIEF TO ALLOW FLUSH MATING OF SURFACES
5.UPSET TO ASSIST RETAINING ACTION .002-.012 (BETWEEN MATED SURFACES)
6.“V”CUTOUT OPTIONAL.
7.BREAK ALL SHARP EDGES AND REMOVE ALL BURRS
8. THESE FITTINGS ARE SED IN PAIRS – WHEN MATING ANY TWO FITTINGS MUST FORM A TIGHT SECURESPLICE.
9. QUALIFICATION: FOR QUALIFICATION: SPLICES MATED) SHALL BE TESTED WITH ANY ONE OF THEFOLLOWING WIRES: MIL-W-5086,ML-W-16878 EXCEPT /8./9 OR 10, MIL-W-22759/1,/9 OR /11ORMIL-W-81381/1,/3 OR/7 AND TOOLING AS FOLLOWS: MIL-C-22520/5-01 TOOLING WITH MIL-C-22520/5-100 DIESINSTALLED FOR SIZES 22 THROUGH 10 SPLICES: OR MIL-C-22520/10-01 TOOLING WITH MIL-C-22520/10-101DIES NSTALLED FOR SIZES 22 THROUGH 14 SPLICES AND MIL-C-22520/10-100 DIES INSALLED FOR SIZES 12THROUGH 10 SPLICES.EXISTING MS90413 AND MS3316 TOOLS IN THE FIELD MAY BE USED UNTIL WORNOUT.
10. DIMENSION “J” REPRESENTS THE MINIMUM OPENING THAT WILL ACCEPT THE FINISHED WIRE
11 CONTOUR INDICATED BY PHANTOM LINES MAY VARY FROM THA SHOWN TO SUIT INDIVIDUALMANUFACTURER’S DESIGN.
12. INSULATION SUPPORT AND TERMINAL BARREL MAY BE MULTIPLE PIECE CONSTRUCTION
13. WIRE INSERTION SHALL BE FACILITATED BY BELL MOUTH
14. THE GOVERNMENT HAS A ROYALTY-FREE LICENSE UNDER U.S. PATENT NO. 3,516,043 DATED JUNE 2, 1970，ENTITLED “HERMAPHRODITIC DISCONNECT TERMINALFOR THE BENEFIT OF MANUFACTURE OF THE ITEMSILLUSTRATED HEREIN EITHER FOR THE GOVERNMENT OR FOR USE IN EQUIPMENT TO BE DELIVERED TO