SAE AS 39029-21-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-81 51 1 SERIES 4 CONNECTORS)
1.a. When using M81044/18-22 or GRUMMAN GC18K1-22 cable wi th M39029/21-03 contact, cut cable jacket to the shield as shown in figure A. Fold shield back tightly against cut end of jacket and trim insulation from center conductor as shown in figure. B. Install shield crimp sleeve “B” as shown in figure C. Trim shield ends flush with shield crimp sleeve.
1.b. When using M27500- 22RC1S6, REVERE WH95623 or CRUMMAN GC875FW22-2 cable with M39029/21-03 contact, cut cable jacket to shield as shown on figure D. Place shield cri mp sleeve “A” over shield and butt against cut end of cable jackel as shown In figure E. Fold shield back tightly over the shield crimp sleeve and trim shielr ends fush with the shield crimp sleeve. Trim insulatlon from center conductor as shown in figure F.
1.c. When using M81044/18-22 or GRUMMAN GC18K1-22 cable wi th M39029/21-01 contact r RAYCHEM 5022E5111 or GRUMMAN GC875GB1 cable. shie1d crimp sleeve_ “A” and “B” are used. Insert the sh1eld cr1mp sleeve. “A” between the insulat1on and the shield_ unt1 it is flush with. the end. of the. shield. as in figure G: S1ide shield crimp sieeve “B” back over the shield until it is flush with both the shield and sh1e1d crimp sleeve “A”.