SAE AS 39029-72-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, SOCKET, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-C-38999 SERIES I, II, III, AND IV, MIL-C-24308, AND MIL-C-55302/68, /71 , AND /75 CONNECTORS)
Qualification:
Shall be in accordance with MIL-C-39029 and MIL-STD-1130 for class A wrap. Suppliers qualified to MIL-C-39029/57M39029/57-354) or MIL-C-39029/56 (M39029/56-348) need only test in accordance with MIL-STD-1130 to gualify thiscontact
Contacts shall comply with reliability assurance provisions of MIL-STD-790 as specified in MIL-C-38999.
Electrical:
Mating contact: The mating contact shall be as specified in MIL-C-39029/58Mechanical:
Vibration: Method 2005 of MIL-STD-1344, test condition V, letter J, except the duration shall be 8 hours in thelongitudinal direction and 8 hours in the perpendicular direction (16 hours total).
Shock (specified pulse): Method 2004 of MIL-STD-1344, test condition D. The following exceptions shall apply:
The pulse shall be an approximate half sine wave of 300 g t15 percent magnitude with a duration ofa.
3 milliseconds +1.
b.The wire bundle shall be clamped to fixed points at 8 inches (203.2 mm) from the rear of the connector.
Wire wrapping: Wire wrapping shall be class A and wrapped in accordance with MIL-STD-1130.
Caution: Maintain light tension on the wire at the start of the wrap until one complete turn has been made
Edge burrs: Wrappost edge burrs shall be .0015 inch (0.14 mm), maximum.
Tools (installation and removal): Tools for installation and removal shall be as specified in table l.